Tupz and Pauls PC fitting

[tack1000]

Guys and any others

The PC route is not just the PC, it has been spoken about a lot but you may have missed the point that you will also need a set of high impedance injectors to go with the PC as it really only works best with them.

I know people have said about getting around this with resistors but it may been more trouble than it's worth and if you have any problems how do you know where it lies with extra things straped to you system that no one has really tried and spoken about here that it works.I know people have said they have heard it works OK, but on our bikes?.....I am not sure about this.

Tack1000

[Blownkwak]

Tack what are the best injectors to use that require minimal modification?

Cheers

Steve

[tupz]

Oh no. First I have heard about it. More expense.

Okay which ones to get and how much roughly do they cost.

[FastFerret]

GPZephyr is using these so I also got some. The flow rates seem to be comparable.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... :MEBIDX:IT

Mine were £30 for the four injectors. They fit straight into the 750 TB's and even better in the 1100 TB's.

bosch part numbers are 0280150420.jpg (26.77 KiB) Viewed 2136 times

I used a hacksaw and took off the plastic at the second groove and then you can fit fuel hose and clips straight onto them.

the bosch part numbers are ; 0280150420.

[Kevin Wiseman]

Do you know what car they are off, having friends in the scrap business and ther are lots of scrap cars around at the moment.
Kevin

[FastFerret]

All I can gather it that they were from Vauxhall 2.0l turbo engined vehicles such as the calibra and vectra.