I have picked up everything I need for the power commander project (except)
1 resistors
2 injectors
Questions
Does the power commander, do away with limp mode?
Is anyone using bosch injectors? I have a stock 750 for now, 1000 on the bench.
Is there a good resistor combination for both the pc and ecu.?
I have a sukuki pc serial 307-210; What does the white/brown, and brown wire do?
I got a cheap dial a boost thing on ebay, It worries me, what do you guys use?
Power commander plan?
-
jeff35m_73068
- Member
- Posts: 13
- Joined: Mon Oct 23, 2006 10:03 pm
- Location: Noble Oklahoma
- Contact:
-
MrFluffy
- Member
- Posts: 3124
- Joined: Thu May 10, 2001 9:36 pm
- Location: In a mud hut, in central france
- Contact:
There is no limp mode. You will need the ecu in race mode whatever you do to stop the fuel computer shutting down after 12psi is reached.
I use a dual port wastegate with a pressure reg across it to vary the spring rate on the wastegate...
http://www.750turbo.com/forum/viewtopic ... 98&start=0
I use a dual port wastegate with a pressure reg across it to vary the spring rate on the wastegate...
http://www.750turbo.com/forum/viewtopic ... 98&start=0