PCV FUEL TABLE

[turbokz]

Hi guys, I have a PC5 and I had to manually enter my base tune values for an 810cc w/ 370cc injectors. My throttle % axis goes 0,5,10,15,20,40,60,80,100.
I wasnt able to find a map with values for the 15% throttle column (see attached pic). Power commander doesnt have an interpolation formula to predict values based off of surrounding values. If anyone could help me out with my 15% column that would be greatly appreciated.

[Mang]

I will try to look at mine tonight to see if I can find anything meaningful. The maps I have are specific to my bike but they may help. Not sure though.

[turbokz]

I will try to look at mine tonight to see if I can find anything meaningful. The maps I have are specific to my bike but they may help. Not sure though.

Oh cool thank you! Any help is greatly appreciated on this site!

[dazbo]

i reckon any interpolation is just going to give a figure in between cells either side or close to ,so
-20
-20
-20
-20
-20
-24
-28
-36
-29
-32
-29
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
should suffice as a starting point ,basically ive picked values halfway between the cells on each side erring on the richer side for values that would otherwise be a fraction as im not sure if you can add a 0.5 in the software.

[Mang]

would do exactly that

[turbokz]

i reckon any interpolation is just going to give a figure in between cells either side or close to ,so
-20
-20
-20
-20
-20
-24
-28
-36
-29
-32
-29
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
-23
should suffice as a starting point ,basically ive picked values halfway between the cells on each side erring on the richer side for values that would otherwise be a fraction as im not sure if you can add a 0.5 in the software.

Thank you!