PC on a 750

SecaGazz · Post by **SecaGazz** » Sat Nov 15, 2008 1:14 pm

I think most of you guys who have a PC fitted have a 810 conversion, would it be worth my while getting one whilst mine remains a 750 (will be converted at some stage) . I posted my Dyno run a while back, I am hoping that it would sort my mixture out once and for all.

Am I right in saying I can use any PC and its just a case of sorting the wires out (discarding most).

Thanks
Gazz

http://www.750turbo.com/forum/viewtopic ... =gazz+dyno

Post by **Lorcan** » Sat Nov 15, 2008 1:31 pm

1Sam1 ran a PC with stock pistons with great results. With cast pistons I would say accurate fuelling is even more important than with forged pistons.

You can use any PC3, PC3USB or PC3R (has extra wires for ignition which we can't use), but not the older PC2.

The USB version is the latest and best.

SecaGazz · Post by **SecaGazz** » Sun Nov 16, 2008 11:57 am

Thanks, I'll look for a PCIII USB for some obscure 4, hopefully at a good price!