Hi, thanks for allowing me in

[moizeau]

Hi all. Although I don't have a 750 turbo, I have various classic Kwaks. A Z1000ST, a 1980 Z650, a Zeph11 and a GPz11 A1 which is why I'm here looking for information. I was directed here by a fellow Z1OC member that said that you are the people to ask. It relates to the anti-dive system. I'll start a new topic on this in the correct section.
Spent a very nice couple of hours reading through your posts.
Thanks
Pete

[Kawadoodle]

The anti dives require regular attention. Some people remove them and fit a blanking plate. However the blank needs a channel linking the ports on the fork leg otherwise the forks won't dampen and the seals will blow. The plate can also be fitted between the anti dive and the fork to give an original appearance. I think you can buy the blanking plates.
Alternatively you could try refurbing your old anti dive units. The service kits are available from 'GPZ Zone' in the United Kingdom.

[Kawadoodle]

Hi again, Saw your other thread. And didn't know that Gpz Zone had stopped trading, that's a shame.

[JezZedexE1]

Hello Pete, or should I say Bonjour.

Welcome to the gang, hope you get the parts you need.

Maybe try getting in touch with the French 750 Turbo Group and hopefully someone will know of a local source for the anti-dive o-rings and other bits.

viewtopic.php?f=18&t=19370

[moizeau]

Thanks for the link