What's the easiest way to make 130rw hp

[Biggs]

Same as the injectors
We have a napa here
What is the serial numbers of the injectors
Or what model car are they off of?

[Charlie @ Evergreen]

Search on top right is your best friend for faster answer and lots of good reading on your build you want to do.

Here is the info for NAPA
Echlin Part # 218506
BWD # 27506
Bosch # 0 280 150 151

[tack1000]

go here read this thread. check out the intercooler section...

viewtopic.php?f=17&t=8866&start=90

as you do machining this cooler fitted very well

[Shredder888]

Remember when I would do one change at a time so had some real feel for the change. Surprisingly the larger boost pipe (used I.D. 1.600) was very noticeable. Then the Billet turbo /KN Filter tuned. Easy 130 plus at 15 lbs. 810 is good idea keep her solid. Throttle bodies didn't notice much but other can chime in I think its more the upper end power last few thousand RPM/.
So Id do
Billet Turbo
Bigger boost pipe/BOV
KN Filter
Adjustable FPR 1:1
300cc Injectors
810 kit
300cc injectors.
Race Mode

Solid 145 to 155hp or more

Where would you get a boost pipe from with an inner diameter of 1.6"?

[Charlie @ Evergreen]

You can make it yourself by purchasing 4 90 degree mandrel bent aluminum tubes cut and fit mark them and tape together check fitment have it tig welded. You need to adapt at the plenum correct size so check fitment size. Don't remember if it fits directly 1.5 or 1.6 ID tubing.