pc v and autotune wiring diagram

[midwest turbo]

hey pc v guys I have a pc v from 2012 cbr 1000rr with auto tune. working on installing it now. wiring is not my thing so this is a little nerve racking.o2 sensor harness run up to autotuned, autotuned usb ported to pc v and power and ground from pc v to battery.pc v ground eyelet to frame,orange yellow green blue to ecu and stripped to injectors.3 questions 1) does the pc v get power through the auto tune power leads and usb or where? 2) better to use tps to tps and analog boost input or grey wire to boost input and eliminate other 2 wired that were to go to tps ? 3) this is an 810 bike 1100 throttle bodies with 36 psi fuel pressure does anyone have a map close enough to get it started and have autotune tune the rest ? any help would be greatly appreciated and please dont make fun of my wiring illiteracy.

[midwest turbo]

ok so with not much help I figured out most of this except the tps in and tps out do I plug these connecters together and run grey to pink in and out or just not hook up the connecters and run pink-grey and grey -pink? please someone who has done this please respond