start up fuel adjustment

[mankam]

Hi all!
Did someone use this feature for pc3?




I read this interest post: http://www.riderforums.com/z1k-z750-per ... post588269


Also does anyone know how many rpm the starter cranks the gpz750 engine?

[gazza]

you don't need to use it
your ecu is already set to deal with it

[mankam]

Hi gazza, thanks for your reply!

In case to use biger injector (i use 350cc), the ECU stiil use map for 270cc injector.
The map from PC3 works up to 500 rpm, the starter cranks below from these Rotation, The logic says that we must change also the fuel map in this rpm area.
Anyway i do not know how this works correctly and how many rpm the starter cranks the gpz750 engine.



I find the email if anyone interest:

From: **********
Sent: Monday, November 23, 2015 12:04 PM
To: tech@powercommander.com
Subject: Function key Power commander III

Hi, i want to enable start up fuel adjustment feature because i use bigger injectors. i have hited the keyboard sequence Ctrl+F,i see the dialog box, but there is no box to click for the feature of start up fuel adjustment. I have installed the latest firmware 2.3.2 that i found at your site. My product serial is 080303012537. My Control Center Software (CCS) Version is 3.2.1 If it is possible,SEND ME THE FUNCTION KEY for start up fuel adjustment.
Regards.

===================================================

ATYTXEZTYHTUYDYHMAAU (this is not work for other pc3)

Let me know if you have any further questions.

Regards,

Chris Kelly

Dynojet Research Inc.

2191 Mendenhall Dr. Suite 105

North Las Vegas, NV 89081

1-800-992-4993

[Dirck]

Seasons Greetings!
Sure you saw this explanation on page 3 of thread you referenced above. Obtain your specific Dynojet PC-III Code from tech support manager specific to modified bike specs, best by phone.
=> http://www.riderforums.com/z1k-z750-per ... uel-3.html
Best success Manos!