Page 68 of 68
Re: New here? Read this first!
Posted: Mon Mar 02, 2026 3:07 pm
by riturbo
Welcome

Re: New here? Read this first!
Posted: Mon Mar 02, 2026 3:32 pm
by JezZedexE1
Hi and welcome to the gang.
Get cracking and start a new project page. We generally try to help, so ask away.
As they say, the only stupid question is the one not asked. You never know, you may even find the answer by digging through 20 years worth of Q&A's.

Re: New here? Read this first!
Posted: Sun Mar 08, 2026 12:06 am
by Charlie @ Evergreen
Welcome

Re: New here? Read this first!
Posted: Tue Sep 15, 2026 7:45 pm
by orse1
Hi
Well where do I start... Had a 1985 Gpz 750 Turbo back in 1987, so fast forward to Sept 25 and I brought a 84 one in very good condition.That said it's been a money pit. It is amazing bike when its working right. Had a lot of problems with the turbo and oil leaks will post issues to see if anyone would help me out with any ideas why.
Cheers
Andy
Re: New here? Read this first!
Posted: Wed Sep 16, 2026 8:07 am
by JezZedexE1
Hi Andy and welcome to the gang.
Plenty of help here. First step would be using the "search" option. In all probability the questions you have will already have been asked & discussed here.... somewhere.
The manuals are also most useful and they are available here in the Download section.
If you add your geo-location to your profile, it will also help us help you.

Re: New here? Read this first!
Posted: Tue Oct 06, 2026 5:02 pm
by orse1
HI
I'm new to this so here goes, have a 84 E1 model it's amazing when it works but that's not often, had many issues mainly turbo ones.... I wouldn't change it, had one back in 1988.
Re: New here? Read this first!
Posted: Tue Oct 06, 2026 10:53 pm
by riturbo
Welcome If you have turbo issues you came to the right place.

Re: New here? Read this first!
Posted: Fri Oct 30, 2026 2:47 pm
by vfrbill1
Greetings to all, newbie here, at least as far as registering officially. Have been referring to site for quite some time while working on my '84 ZX750E restomod project. Will post photos soon. I'm an "older" rider with 62 years of riding experience, having owned a LOT of bikes. Currently, besides the ZX I have a 2009 Triumph Tiger 1050. Also into sports cars, owning a pristine 1990 Nissan 300ZX Twin Turbo. Located in Ohio near great riding territory, spend a lot of time in West Virginia and North Carolina.
Re: New here? Read this first!
Posted: Sat Oct 31, 2026 12:25 pm
by JezZedexE1
Hi and welcome to the gang.
Start a new thread when you get the time, so we can see your progress. I imagine a fair few of us are of an age that when the Turbo first appeared, we were there.

Re: New here? Read this first!
Posted: Sun Nov 01, 2026 2:37 pm
by Imre
Hi everyone!
I’m new to this site, so I thought I’d write a few lines about myself.
My name is Imre; I was born in Budapest, Hungary, where I still live, and I’ll soon be turning 67. I’ve been riding motorbikes since I was a child, and my love for them hasn’t waned since. I own about 35 motorbikes from the 1970s and 1980s, all in really good condition. I restore them myself and carry out all routine maintenance as well.
I have recently acquired a 1984 ZX750E1. The bike currently has 4,800 km on the clock. The mileage is genuine; I was able to verify it right back to when it was first registered.
I’m having a problem with the exhaust, and I’d be very grateful if anyone could help.
Best regards to all my motorcycling friends. :
Imre
Subject: Advice needed: Conserving original KHI K 083 exhaust with minor pitting (4,800 km survivor)
Hi Everyone,
I am the proud owner of a time-capsule Kawasaki GPZ750 Turbo (ZX750E). The bike is an absolute survivor with only 4,800 kilometers (approx. 3,000 miles) on the odometer. It is in museum/all-original condition, and my goal is to preserve its factory authenticity as much as possible.
The bike still has its original, factory-installed exhaust system with the correct KHI K 083 stamping on the mufflers.
Mechanically and structurally, the exhaust is solid, and there is no deep rust or dents. However, on the right-hand side muffler, I am starting to see the typical aging signs of the vintage Japanese black chrome: tiny surface blisters (pitting) and small, white powdery spots/stains.
I am highly aware that re-chroming a used exhaust is almost impossible due to carbon contamination in the tanks, and it would likely destroy or fade the irreplaceable KHI K 083 stamping.
I would love to get your expert advice on the following:
1. What is the safest, non-invasive method to chemically clean and remove the white oxidation spots without wearing through the very thin factory black chrome layer? (I want to avoid abrasive polishes like Autosol or steel wool).
2. What are your recommendations for sealing/conserving the surface to stop the pitting from spreading? Have you had success with microcrystalline museum waxes (like Renaissance Wax) or high-temperature carnauba waxes?
3. If anyone has experience in preserving original KHI K 083 pipes, I would highly appreciate your input or photos of your results.
Thank you very much for your help!
Re: New here? Read this first!
Posted: Thu Nov 05, 2026 12:07 pm
by JezZedexE1
Hi Imre and welcome to the gang.
That is a great find.

Enjoy the restoring/refurbishing process. Good to know it will be kept standard.
Get a new thread started in the appropriate section and the help & ideas should start rolling in.

Re: New here? Read this first!
Posted: Thu Nov 05, 2026 9:56 pm
by Kawadoodle
The right hand silencer has the shorter route from the turbo and probably runs slightly hotter. Therefore its plated finish is subject to more heat stress and will age quicker than the left side. The blisters are a symptom of aging and the white marks are probably underlying nickel oxide formation where the black chrome has worn through. Waxes and oils will help preserve the surface whilst not in use but burn off when the exhaust gets hot. I wipe mine over with WD40 or just silicone spray to stop moisture attacking the surface when the bike has been cleaned and stored. Black chrome is a very niche finish and platers who do it are very few and far between. Most manufacturers use alternative coatings on exhausts these days. If I recall the black chrome plating process has restrictions, possibly associated with chromates that are carcinogenic. Application of black chrome, even on new parts, is problematic. Therefore I would suggest living with the finish is the better option if you want originality. Alternatively you could have them finished in ceramic for which there are now coatings that look similar to black chrome. Or you could buy one of Malcom Coxes replicas that look identical with stamps, they come up quite often on ebay.