New here? Read this first!

Welcome to the forum - please introduce yourself here before posting for the first time.
riturbo
Supporter
Posts: 2446
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: New here? Read this first!

Post by riturbo »

Welcome :beer
User avatar
racink
Supporter
Posts: 1164
Joined: Sun Dec 14, 2003 6:47 am
Location: nebraska, USA

Re: New here? Read this first!

Post by racink »

:victory
Image
adamh6599
Member
Posts: 1
Joined: Wed Aug 09, 2023 12:13 am

Re: New here? Read this first!

Post by adamh6599 »

hi all, based in the uk and loving my turbo. just need to remove the turbo next and have an overhaul done on the charger.
im sure ill have alot of questions for you all to hopefully answer.
cheers
adam
User avatar
JezZedexE1
Intercooler
Posts: 5189
Joined: Mon May 17, 2010 7:40 am
Location: Royal Forest Of Dean, England

Re: New here? Read this first!

Post by JezZedexE1 »

Hi Adam & welcome to the gang. :beer :thumbup

Get posting with the questions. Once you get to grips with the forum, a pic or two is always welcome. Add your location too, it always helps. :popcorn
JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
User avatar
georgew4714
Supporter
Posts: 2650
Joined: Thu Aug 30, 2007 3:02 am
Location: Newton New Hamshire USA

Re: New here? Read this first!

Post by georgew4714 »

Welcome aboard Adam :beer
84 750E1 ,zx7 swing arm & rim , Zr7s shock ,dyna coils, k&n , bov , afpr , variable resistor for race mode. Ported spider ,dump pipe , Evergreen billet HT-10 , RTI hydraulic clutch .
User avatar
Charlie @ Evergreen
Supporter
Posts: 7730
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: New here? Read this first!

Post by Charlie @ Evergreen »

Welcome Adam :beer
munners
Member
Posts: 15
Joined: Fri Aug 18, 2023 12:08 am
Location: Australia

Re: Hi From Newby Ray

Post by munners »

Hi I have a turbo i have been rebuilding from scratch, it been very interesting as i've slowly put it back together.
I have a few questions like i can not get it to idle below 1500rpm
Also after some parts left hand air box metal cover and the LH and RH Mid cowlings and a fuel pump
Any help would be greatly appreciated
Can not wait to go for my first ride
I had one last in 1986 and it was a lot of fun
cheers
Ray
User avatar
Charlie @ Evergreen
Supporter
Posts: 7730
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: New here? Read this first!

Post by Charlie @ Evergreen »

Welcome to the forum :beer

Go to projects and start your bike build page there. Many will be able to help you thru the process.

Lot of good help here with experience and knowledge being around the the 750 turbos.
bonyt
Member
Posts: 7
Joined: Thu Sep 21, 2023 4:41 pm

Re: New here? Read this first!

Post by bonyt »

Hi All. I'm from Waterloo, Ontario and just purchased a low mile turbo at 16k kms.
The bike is complete, no missing parts, but does need a real good clean.
Still going to take it mostly apart to do the fork bushings/seals/fluid, calipers and brakes, resurface the rotors, adjust valves, check out cam chain tensioner, filters, battery, etc.
Previous owner did the clutch dampers as he was a member of this site.
Really looking forward to getting this bike ready for next spring riding season.
I've been browsing the forum for the last few weeks, trying to learn as much as I can about the bike.
Lots of good information gleaned so far, and I'm sure there will be many questions during this refurbishment.
Cheers
IMG_4397.jpg
IMG_4397.jpg (26.85 KiB) Viewed 3402 times
The number of bikes you should own = (N+1), where N is the number of bikes you currently own. :thumbup
User avatar
georgew4714
Supporter
Posts: 2650
Joined: Thu Aug 30, 2007 3:02 am
Location: Newton New Hamshire USA

Re: New here? Read this first!

Post by georgew4714 »

Welcome aboard :beer
Good luck on your project
84 750E1 ,zx7 swing arm & rim , Zr7s shock ,dyna coils, k&n , bov , afpr , variable resistor for race mode. Ported spider ,dump pipe , Evergreen billet HT-10 , RTI hydraulic clutch .
User avatar
Charlie @ Evergreen
Supporter
Posts: 7730
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: New here? Read this first!

Post by Charlie @ Evergreen »

Welcome to forum :beer
Gtorx7
Member
Posts: 1
Joined: Sun Sep 24, 2023 4:51 am

Re: New here?

Post by Gtorx7 »

Hi everyone, joined shortly after buying my 84 model turbo. It was in a million pieces and boxes. Previous owner had bought a lot of NOS parts and did some good work to it, but sold due to moving. Took me about a month, but it's all together. At least now I know every nut and bolt of the bike. It joined up with my gpz900r and kz1300 nicely. Total blast to ride
Attachments
received_152816194519745.jpeg
received_152816194519745.jpeg (400.59 KiB) Viewed 3380 times
received_847785980239565.jpeg
received_847785980239565.jpeg (285.04 KiB) Viewed 3380 times
received_989823842253983.jpeg
received_989823842253983.jpeg (312.24 KiB) Viewed 3380 times
received_1003691577564267.jpeg
received_1003691577564267.jpeg (256.83 KiB) Viewed 3380 times
User avatar
Charlie @ Evergreen
Supporter
Posts: 7730
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: New here? Read this first!

Post by Charlie @ Evergreen »

Welcome ! Good work!! Another great looking 750 hits the road again :thumbup

Make a build page for your 750 in projects and share your story as it evolved. Pics are wonderful!

Where you located? Fill in your info :beer
riturbo
Supporter
Posts: 2446
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: New here? Read this first!

Post by riturbo »

Welcome :beer :beer
User avatar
youngblood
Supporter
Posts: 1767
Joined: Thu Dec 31, 2009 4:18 pm
Location: Surrey, UK

Re: New here? Read this first!

Post by youngblood »

Welcome
What's the front suspension on your Z1300?
Z650 810 Turbo 1977
Z1100 R1 1984
ZX750 E1 1984
ZX750 E2 1985
ZX750 E2 1986
ZX750 E2 1986
Post Reply