which pc3 can i use,write down all pc3 you know works

[amdshaner]

I picked up a PC3USB for an 07 GSXR 750. Has 12 wires, will hopefully have it hooked up next sunday. Was at the shop yesterday and got the new boost gauge mounted, RC370 injectors installed and everything mounted back up. Just gotta finish wiring the PC3 and spin it up..

Shane

[Lorcan]

That should be spot on. I'll try to post some map figures tonight too give you a starting point. Will you be using the standard (36psi) FPR or an adjustable?

[amdshaner]

I do have an AFPR but I see now with the PC3 I don't need it so I do have it set to stock 36psi. Doesn't really matter anyway since its on my dragbike, im not using a stock fuel tank. I had to drill and tap the backbone tank for a return fitting and fit some sort of regulator so I just went with an AFPR.

Actually I used your other map I found to start with Lorcan..
It was for a gt22 turbo with 370 injectors. If you have a better map, it would be appreciated but I did load that map to start with. I did have to self make numbers for all the 250 increments..

Shane

[Lorcan]

That one should be fine to get you going.