Billet Compressor Cover Upgrade

[Charlie @ Evergreen]

Turboblews swap from Stage 2 to Billet Upgrade.
Most parts replaced..turbine wheel, bearing housing, seal plate. Ready to get the boost on

[turbo_Rob]

Nothing like viewing turbo porn while eating lunch.

[Charlie @ Evergreen]

Woody's allowed ...

[Turboblew2]

I dont know about all this precision machining, balancing, and billet stuff. I hope youre not steering me wrong!

[Charlie @ Evergreen]

No boost gauge required..its warp speed looking ahead! Watch the road! Its a blur

[riturbo]

Never get tired of seeing those new turbos .

[Charlie @ Evergreen]

Haven't been posting due to FB crap..but there still flowing thru weekly. 3 in the last week.

Anyone suggest a host site for pics that will not charge out the king yang??

Or will we be soon to post directly to the site Lorc??

[longfiredragon]

Charlie I see this post is a bit old, but anyway I am using Flicker now. It is free, but I believe only up to a certain amount. Then I don't think it is real expensive. Of course you always have the option of editing, meaning once you get up there in storage go through and just get rid of the really old pic.'s Then it may take a while to reach beyond where they start charging.

There is also google photos, it's free as well. Not sure if they charge after a certain amount, you would have to check it out.

[Charlie @ Evergreen]

Thanks Darryl....PB started same way and when went over my limit they hit me with the 3rd party at same time..maybe conicidence..either way I deleted so many pics I am at 2%! and of course they still want the 3rd party deal. I got suckered into a $59.95 deal they sent me to upgrade then they hit me with the $499 upgrade..I posted some pics lately and they posted. I get notices when I am copying the pic to post that I need to upgrade but they don't stop the posted pic..think cuz they got me on the $59 upgrade but are kinda stuck if they stick it to me??? I have not idea.

When they stop posting I will give your flicker thingi a try ...thanks!!

[RCJones]

Can the billet upgrade be done with oem intake & exhaust and NOT in racemode? Ok...is it ok to do? Would like to remain original if not going to cause issues.

[Charlie @ Evergreen]

yes it sure can! Slayer is one example ran his billet upgrade and only tuned his bike which was 41 lbs on FP and left boost lower at 12 lbs. No worries if you set your Fuel Pressure. Only thing ask is if anyone plans on running this non race mode setup we need to set the waste gate up for lower boost for correct application.

[RCJones]

Thanks Charlie...and what it the upgrade to be able to adjust and measure fuel pressure?

[Charlie @ Evergreen]

Your welcome!

You have to install a adjustable FPR in place of the stocker. So you can put a gauge on and set FP.

[Deerslayer64d]

yes it sure can! Slayer is one example ran his billet upgrade and only tuned his bike which was 41 lbs on FP and left boost lower at 12 lbs. No worries if you set your Fuel Pressure. Only thing ask is if anyone plans on running this non race mode setup we need to set the waste gate up for lower boost for correct application.

Good memory C my bike was set up bilet upgrade turbo , FPR set at 41 lbs , boost 12-13 lbs , non race mode and ran a dream , pulled like a banshee

[RCJones]

Your welcome!

You have to install a adjustable FPR in place of the stocker. So you can put a gauge on and set FP.

Is there a setup that you recommend?