FUEL TANK HARDWARE

How to make your turbo good as new, and keep it that way
Post Reply
FB GPZ Turbo
Member
Posts: 14
Joined: Thu Feb 29, 2024 2:06 am

FUEL TANK HARDWARE

Post by FB GPZ Turbo »

Guys I am in a pickle here. My 84 purchased from a neglectful prior owner is on the way back to being roadworthy. After getting the rotted fuel tank repaired and painted (Moyers Tank) excellent work btw. My mechanic found that several key parts are missing from the fuel tank. The sending unit,the petcock/tap and the return valve. Of course all are no longer available from Kawasaki. I purchased a petcock/tap from a NA GPZ750 but it seems that they aren’t compatible. If I could find a damaged tank or someone who might the above mentioned parts would be a huge help TYIA!
Attachments
IMG_0296.jpeg
IMG_0296.jpeg (244.69 KiB) Viewed 2120 times
rangeroy
Supporter
Posts: 274
Joined: Sat Mar 03, 2018 4:34 pm
Location: Yorkshire.England

Re: FUEL TANK HARDWARE

Post by rangeroy »

you will need to alter float orientation
https://www.ebay.com/itm/257079201979?m ... a02d346892

fuel tap of z1300 but should have correct spacing just throw filters away turbo doesnt have them uses seperate filter
https://www.ebay.com/itm/157719211063

return valve
https://www.z-power.co.uk/gpz-air-coole ... fuel-valve
FB GPZ Turbo
Member
Posts: 14
Joined: Thu Feb 29, 2024 2:06 am

Re: FUEL TANK HARDWARE

Post by FB GPZ Turbo »

Thanks for your reply and help..I ordered from Z Power thanks!
FB GPZ Turbo
Member
Posts: 14
Joined: Thu Feb 29, 2024 2:06 am

Re: FUEL TANK HARDWARE

Post by FB GPZ Turbo »

Just an update,thanks to your replies here I was able to order some parts that I needed and hopefully take another step to riding my Turbo in the summer. Thanks for your help guys!
FB GPZ Turbo
Member
Posts: 14
Joined: Thu Feb 29, 2024 2:06 am

Re: FUEL TANK HARDWARE

Post by FB GPZ Turbo »

Here’s an update guys , thanks for all your help the bike roared to life today. Can’t post the video here (too big) but hopefully pics soon! Thanks again guys for all your support! Just an FYI. The GPZ 1100 sender worked not perfectly but it worked..the KZ1300 tap the spacing was different..I’ll update when I have the info!
Last edited by FB GPZ Turbo on Tue Nov 03, 2026 3:56 am, edited 1 time in total.
rangeroy
Supporter
Posts: 274
Joined: Sat Mar 03, 2018 4:34 pm
Location: Yorkshire.England

Re: FUEL TANK HARDWARE

Post by rangeroy »

:rock :thumbup :beer :victory
SilveradoKC
Supporter
Posts: 133
Joined: Tue Aug 20, 2024 1:55 pm
Location: USA- South Florida

Re: FUEL TANK HARDWARE

Post by SilveradoKC »

Join the Facebook page- much easier to post pics/video
KC
FB GPZ Turbo
Member
Posts: 14
Joined: Thu Feb 29, 2024 2:06 am

Re: FUEL TANK HARDWARE

Post by FB GPZ Turbo »

I’m a member there too..tbh the board here was a bigger help!
rangeroy
Supporter
Posts: 274
Joined: Sat Mar 03, 2018 4:34 pm
Location: Yorkshire.England

Re: FUEL TANK HARDWARE

Post by rangeroy »

with regard to z1300 tap there are 2 types,1 for the fuel inected bikes & 1 for the early carb versions which have a vaccum tap , my error for not giving correct advice :cry
FB GPZ Turbo
Member
Posts: 14
Joined: Thu Feb 29, 2024 2:06 am

Re: FUEL TANK HARDWARE

Post by FB GPZ Turbo »

Rangeroy my mechanic found a petcock with the proper spacing. I’m picking it up Wednesday. If I have the information/part # I’ll share it.
Post Reply