Oil Pan Upgrade O-Rings

[RCJones]

Where do I get the unavailable O-Rings for the oil pan mods?

[riturbo]

You can get most of them here https://www.partzilla.com/catalog/kawas ... er-oil-pan

Think the only one not available is the sub pan o ring . Theres a few ways some members glue o rings together from kits . George w found some somewhere a few years back . Im sure he will be along shortly with that info


Also found this viewtopic.php?f=7&t=14029&p=155559&hilit=Sub+oil+pan+gasket#p155559

Old post from charlie
Items needed to upgrade your OIl Pan & Clutch Basket to reinstall Parts
Oil Pan Main Galley O Rings PN 92055-077 (3)
Oil Pan Oil Pump O Ring PN 92055-074 (1)
Sub Pan O Ring PN 92055-1211
Sub Pan O Ring PN 670B1510
Main Pan Large O Ring 671B2590
Clutch Cover Gasket PN 14046-

Charlie @ Evergreen
Intercooler

[RCJones]

I used that list to identify what's NOT available. Since I'm certainly not the first to do this I wanted to know what other folks are doing.

[georgew4714]

Can you be more specific as to which orings your finding are unavailable?

As far as i can tell , the subpan oring and the main oilpan gasket are the only ones not available through Kawasaki but a comparable size oring is available from many different suppliers for under a buck a pc for the subpan and Mang is generously organizing a group buy for the main pan gasket as we speak .

viewtopic.php?f=4&t=17748

[RCJones]

I thought there were 2 but I guess it is only the Sub Pan O- Ring 92055-1211. Ok, so what are we using instead and where do I get it? My search skills are weak.

[RCJones]

and yes...I'm on the list for a few oil pan gaskets.

[Charlie @ Evergreen]

Will try to dig out a sub pan and go match up a O Ring at my local hydra shop. I have used a Toyota CT20 Comp Cover O Ring. Size is correct but its larger in diameter. Sealed excellent but really need to have proper thickness.

[RCJones]

Thank you Charlie! I have 2 bikes if you are able to get a couple. Just add them to my bill please.

[Charlie @ Evergreen]

Gonna find the sub pan today and will get down one day this week..hopefully Tuesday a.m. Buried here in work and working today again. When I get this sorted I may just buy 25 of each O Ring and stock them for others when needed.

[RCJones]

No huge rush...got cold here again...and I'm going to be taking the turbos off anyway. Trying to get ready for April or May. Just ordering everything I need so I have some good days in the shed

[Charlie @ Evergreen]

Sounds good thanks!

[Norwichnigel]

Watching from UK as I also need one, tried making one with no success!

[Chris G]

Watching from UK as I also need one, tried making one with no success!

A fair few have made them ok, done a couple at least without a drip.
Viton o ring splice kits are the best but not cheap.

[Kawadoodle]

Tried and tested, works fine:

https://www.ebay.co.uk/itm/BS159-2-62mm ... 1946503224

[Kawadoodle]

Above although round it replaces the rectangle oil pan one a treat.