Sump / Breather o-ring.

Please use this forum to list NEW parts, with their price, supplier and location. NO DISCUSSION PLEASE!

Sump / Breather o-ring.

Postby scottlv123 » Thu Nov 15, 2018 4:06 am

92055-1211 o ring Kawasaki Sump / Breather o-ring.
I cannot find available.


What is everyone doing??
scottlv123
Member
 
Posts: 27
Joined: Wed Aug 31, 2016 2:53 am
Location: Las Vegas, NV USA

Re: Sump / Breather o-ring.

Postby Kawadoodle » Thu Nov 15, 2018 8:42 am

Order an o ring this size: Nitrile 70 grade - size is: 126.67mm x 2.62mm. You should find one from a general bearing and o ring stockist near you.
Kawadoodle
Supporter
 
Posts: 659
Joined: Tue Oct 16, 2012 8:37 pm

Re: Sump / Breather o-ring.

Postby georgew4714 » Thu Nov 15, 2018 12:35 pm

Try not to post your question in more than one place :cop :beer

viewtopic.php?f=4&t=17659
84 750E1 ,zx7 swing arm & rim , Zr7s shock ,dyna coils, k&n , bov , afpr , variable resistor for race mode. Ported spider ,dump pipe , Evergreen billet HT-10 , RTI hydraulic clutch .
User avatar
georgew4714
Supporter
 
Posts: 2348
Joined: Thu Aug 30, 2007 3:02 am
Location: Newton New Hamshire USA

Re: Sump / Breather o-ring.

Postby JezZedexE1 » Sat Nov 17, 2018 7:39 am

I bought a length of the correct size nitrile , cut a piece off and joined the ends with a drop of superglue. Works OK. :thumbup
JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
User avatar
JezZedexE1
Supporter
 
Posts: 4171
Joined: Mon May 17, 2010 7:40 am
Location: Royal Forest Of Dean, England

Re: Sump / Breather o-ring.

Postby scottlv123 » Tue Nov 20, 2018 7:34 pm

Good to Know, and THANK YOU!!
scottlv123
Member
 
Posts: 27
Joined: Wed Aug 31, 2016 2:53 am
Location: Las Vegas, NV USA

Re: Sump / Breather o-ring.

Postby RCJones » Sun Mar 31, 2019 3:23 am

If you find them in the US let us know
If at first you don't succeed...Buy, Buy again
RCJones
Supporter
 
Posts: 205
Joined: Mon Mar 06, 2017 5:44 am
Location: Durham, NC

Re: Sump / Breather o-ring.

Postby Charlie @ Evergreen » Sun Mar 31, 2019 12:38 pm

partszilla.com shows they have 9 in stock for the Breather O Ring :thumbup


https://www.partzilla.com/product/kawas ... b10e5dcd85
84' ZX750 Turbo 85'ZX750 Turbo
User avatar
Charlie @ Evergreen
Intercooler
 
Posts: 6402
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: Sump / Breather o-ring.

Postby paulc » Sun Mar 31, 2019 2:05 pm

JezZedexE1 wrote:I bought a length of the correct size nitrile , cut a piece off and joined the ends with a drop of superglue. Works OK. :thumbup


Sorry guys but this is not the preferred method for O ring replacement. The superglue forms a very brittle bond between the two ends which (when compressed as every good O ring should be) will eventually split. It works for a while............
User avatar
paulc
Member
 
Posts: 16
Joined: Sat Jan 12, 2019 3:35 pm
Location: Ihrhove, Germany


Return to New Parts Resource

Who is online

Users browsing this forum: No registered users and 2 guests