3D Printed Replica Items

Please use this forum to list NEW parts, with their price, supplier and location. NO DISCUSSION PLEASE!

Re: 3D Printed Replica Items

Postby Greyv » Sat Jun 23, 2018 8:23 pm

ever thought of producing 3D printing air box covers?
Just because your Paranoid doesnt mean they are not out to get YOU
Greyv
Supporter
 
Posts: 91
Joined: Wed Jul 11, 2001 10:07 pm
Location: Wolverhampton.UK

Re: 3D Printed Replica Items

Postby TurboRestorer » Sat Jun 23, 2018 9:47 pm

Greyv wrote:ever thought of producing 3D printing air box covers?


Hi, Yes the surge tank covers are on the menu when I get time as its a complicated profile to do on solidworks. I also have the toolbox but having trouble printing this, not sure if the model needs adjusting or there's an error in the print software.

Regards,
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby riturbo » Sun Jun 24, 2018 9:57 am

How about the battery covers ?
riturbo
Supporter
 
Posts: 1919
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: 3D Printed Replica Items

Postby TurboRestorer » Mon Jun 25, 2018 9:42 am

riturbo wrote:How about the battery covers ?


Hi, Is this P/N 11012-1292 , Cap, Battery? If so I have an unused OEM one to copy.

Regards,
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby riturbo » Mon Jun 25, 2018 11:45 am

TurboRestorer wrote:
riturbo wrote:How about the battery covers ?


Hi, Is this P/N 11012-1292 , Cap, Battery? If so I have an unused OEM one to copy.

Regards,
Adrian

ya that cover . just a thought
riturbo
Supporter
 
Posts: 1919
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: 3D Printed Replica Items

Postby TurboRestorer » Mon Jun 25, 2018 12:18 pm

riturbo wrote:
TurboRestorer wrote:
riturbo wrote:How about the battery covers ?


Hi, Is this P/N 11012-1292 , Cap, Battery? If so I have an unused OEM one to copy.

Regards,
Adrian

ya that cover . just a thought



I'll have a look at this later this week weh I can find my OEM one.
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby TurboRestorer » Thu Jun 28, 2018 4:46 pm

Standard toolboxes are now available in black PLA+ material. These will be print to order @ 18 hour each print & I can only do 1 at a time.

Regards,
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby 145turbo » Fri Jun 29, 2018 8:47 am

Hi Adrian. Can you PM me with a price for the tool tray/box? Thanks
Rick
User avatar
145turbo
Supporter
 
Posts: 300
Joined: Thu Jan 15, 2015 6:17 pm
Location: Glasgow, Scotland

Re: 3D Printed Replica Items

Postby TurboRestorer » Sun Jul 01, 2018 8:05 am

Battery cover is now prototype printing, I have copied an OEM one but can't test fit on my bike, so fingers crossed its as perfect as I can get it.

Regards
Adrian
Attachments
Battery Cover.JPG
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby 145turbo » Sun Jul 01, 2018 9:51 am

Got another one for you Adrian. Just under the battery cover are 2 rubber dampers, 92075-078. Can you print those?

Rick
User avatar
145turbo
Supporter
 
Posts: 300
Joined: Thu Jan 15, 2015 6:17 pm
Location: Glasgow, Scotland

Re: 3D Printed Replica Items

Postby TurboRestorer » Sun Jul 01, 2018 10:16 am

145turbo wrote:Got another one for you Adrian. Just under the battery cover are 2 rubber dampers, 92075-078. Can you print those?

Rick

These 2 dampers are fitted to the tank support bracket & locate on the 2 bosses on top of the battery cover, yes I can print these but I need some dimensions to work from as I don't have an OEM to copy from.

Just done an initial drawing for those dampers BUT I need the distance between the bottom of the tank bracket & the battery your using +1mm for clamping (YB14-LA2 ?) then all I have to do is adjust the thickness then I'm ready to print the prototype version.

Adrian

Thanks for the info guys, I can now go ahead & setup a printer profile for this product!
Damper Rubber Tank Support.JPG
:beer
Last edited by TurboRestorer on Sun Jul 01, 2018 8:04 pm, edited 2 times in total.
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby VinoBassi » Sun Jul 01, 2018 11:48 am

Must say you are a legend Mate..making these absolute parts,cheers. :thumbup :beer
Little Guys Do Have Big Dreams Too!
User avatar
VinoBassi
Supporter
 
Posts: 1801
Joined: Sun Mar 16, 2014 12:18 pm
Location: Sydney Australia

Re: 3D Printed Replica Items

Postby TurboRestorer » Sun Jul 01, 2018 12:10 pm

VinoBassi wrote:Must say you are a legend Mate..making these absolute parts,cheers. :thumbup :beer


I'm learning solidworks with some of these parts & I like helping people with the same interest in keeping these rare beasts alive.
:banana

The surge tank covers will be a test/learning curve as no part of them is a solid straight/flat bit to work from. When I get round to printing these I will leave the finishing up to the buyer as I'm not a bodywork/painter, this will also mean I can do them cheaper.

Thanks
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Postby JezZedexE1 » Sun Jul 01, 2018 2:01 pm

I need some dimensions to work from as I don't have an OEM to copy from.


Well, what do you know. :humour
Use revised version :cop

:thumbup
Last edited by JezZedexE1 on Sun Jul 01, 2018 6:28 pm, edited 1 time in total.
JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
User avatar
JezZedexE1
Supporter
 
Posts: 4176
Joined: Mon May 17, 2010 7:40 am
Location: Royal Forest Of Dean, England

Re: 3D Printed Replica Items

Postby TurboRestorer » Sun Jul 01, 2018 4:01 pm

JezZedexE1 wrote:
I need some dimensions to work from as I don't have an OEM to copy from.


Well, what do you know. :humour

92075-078.pdf

:thumbup


Hi Jez, Quick question, I have 9mm holes for these dampers in my tank support plate, the drawing shows 4.4dia.??
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

PreviousNext

Return to New Parts Resource

Who is online

Users browsing this forum: No registered users and 1 guest