3D Printed Replica Items

Please use this forum to list NEW parts, with their price, supplier and location. NO DISCUSSION PLEASE!
User avatar
JezZedexE1
Supporter
Posts: 4604
Joined: Mon May 17, 2010 7:40 am
Location: Royal Forest Of Dean, England

Re: 3D Printed Replica Items

Post by JezZedexE1 »

Oh crap. Something is wrong. :finger:

I will replace it as soon as I find out where I cocked up. :oops:
JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
User avatar
TurboRestorer
Member
Posts: 68
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Post by TurboRestorer »

I looked online & the drawing you gave me looks correct, I just don't know why mine has 9mm holes instead of 4.4mm holes. I was hoping someone could look at their bike & confirm 9mm or 4.4mm.
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
JezZedexE1
Supporter
Posts: 4604
Joined: Mon May 17, 2010 7:40 am
Location: Royal Forest Of Dean, England

Re: 3D Printed Replica Items

Post by JezZedexE1 »

Here is a revision.
revised 92075-078.pdf
(25.43 KiB) Downloaded 104 times
:beer
JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
User avatar
145turbo
Supporter
Posts: 317
Joined: Thu Jan 15, 2015 6:17 pm
Location: Glasgow, Scotland

Re: 3D Printed Replica Items

Post by 145turbo »

Just checked, mine has 9mm hole
User avatar
145turbo
Supporter
Posts: 317
Joined: Thu Jan 15, 2015 6:17 pm
Location: Glasgow, Scotland

Re: 3D Printed Replica Items

Post by 145turbo »

Had another look at pic that Jez sent...it points to 8.8mm which probably allows for fitting into the 9mm hole. .... i think :popcorn
User avatar
TurboRestorer
Member
Posts: 68
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Post by TurboRestorer »

145turbo wrote:Had another look at pic that Jez sent...it points to 8.8mm which probably allows for fitting into the 9mm hole. .... i think :popcorn
Thats the new revised file which I have just adjusted the CAD drawing to. Ready to print now. :thumbup
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
Posts: 68
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Post by TurboRestorer »

Hi, Dampers for the battery cover/tank mount brace are now available as listed.

Regards,
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboStew
Member
Posts: 359
Joined: Sat Jun 22, 2013 12:28 pm
Location: Melbourne Australia

Re: 3D Printed Replica Items

Post by TurboStew »

Good job Adrian on these parts, :beer Stewart
User avatar
Witchita Linemen
Supporter
Posts: 300
Joined: Sat Sep 29, 2007 3:58 pm
Location: San Jose, CA

Re: 3D Printed Replica Items

Post by Witchita Linemen »

Hi Adrian,
Have you done up 92075-1312. This is the rectangular rubber hanger that holds the ECU in place. There's also a couple of them on the backside of the plenum holding the boost sensor in place. I would be happy to buy some if you have them. I didn't see it on your list.
User avatar
georgew4714
Supporter
Posts: 2409
Joined: Thu Aug 30, 2007 3:02 am
Location: Newton New Hamshire USA

Re: 3D Printed Replica Items

Post by georgew4714 »

Adrian may be able to supply them cheaper and i have a few of his other quality repros but as a backup , Partzilla has them in stock for $7.58 ea.
84 750E1 ,zx7 swing arm & rim , Zr7s shock ,dyna coils, k&n , bov , afpr , variable resistor for race mode. Ported spider ,dump pipe , Evergreen billet HT-10 , RTI hydraulic clutch .
User avatar
TurboRestorer
Member
Posts: 68
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Post by TurboRestorer »

Hi Guys,
Those little ECU/relay dampers are an easy thing to make so I'll have something before the end of this week for you. Currently both printers are in use for classic Mini parts & I've designed my own larger printer 400x400x400 which could be used for larger items on the bike (if it works!)
Looking at your Partzilla price/each I could probably do a complete set for that + P&P, but I'll do the model & test prints first.

Regards,
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
Witchita Linemen
Supporter
Posts: 300
Joined: Sat Sep 29, 2007 3:58 pm
Location: San Jose, CA

Re: 3D Printed Replica Items

Post by Witchita Linemen »

Cool! Eagerly standing by. I'd much rather spend my pennies here than at Partsazilla!
User avatar
TurboRestorer
Member
Posts: 68
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: 3D Printed Replica Items

Post by TurboRestorer »

These will be a tighter fit than OEM ones, I found the OEM ones were a little on the soft side allowing the relay to 'flop' about after some time. these should 'click' into place & are a better material.
Currently printing 2 sets of 5, 3x ECU + 2x Dual relay.

Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
georgew4714
Supporter
Posts: 2409
Joined: Thu Aug 30, 2007 3:02 am
Location: Newton New Hamshire USA

Re: 3D Printed Replica Items

Post by georgew4714 »

You da man Adrian :thumbup
84 750E1 ,zx7 swing arm & rim , Zr7s shock ,dyna coils, k&n , bov , afpr , variable resistor for race mode. Ported spider ,dump pipe , Evergreen billet HT-10 , RTI hydraulic clutch .
User avatar
Witchita Linemen
Supporter
Posts: 300
Joined: Sat Sep 29, 2007 3:58 pm
Location: San Jose, CA

Re: 3D Printed Replica Items

Post by Witchita Linemen »

WhooHoo!
Post Reply