Replica 3D Printed Surge Tank Dampers

Please use this forum to list NEW parts, with their price, supplier and location. NO DISCUSSION PLEASE!

Replica 3D Printed Surge Tank Dampers

Postby TurboRestorer » Mon Mar 19, 2018 5:50 pm

Hi, I have been able to 3D print the damper rubbers for the surge tank end covers. I intend to sell these at £10 for 8 (free P&P UK), this is 4 on the bike & a spare set.
The material is a modern rubber type material which should resist vibration & most chemicals thrown at it.
DSCN6496.JPG


Please PM me if you require any, I have 48 in stock & can print as many as required. It is a direct copy of the OEM part & again is test fitted on my bike + gpzrfun has tested for me on his bike.


Regards,
Adrian
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: Replica 3D Printed Surge Tank Dampers

Postby Chris G » Mon Mar 19, 2018 6:11 pm

Good move :thumbup
User avatar
Chris G
Supporter
 
Posts: 3772
Joined: Tue Oct 02, 2007 11:19 am
Location: Bucks - UK

Re: Replica 3D Printed Surge Tank Dampers

Postby Eckhard » Mon Mar 19, 2018 6:34 pm

Good work. I am interested in 3D printing and am curious as to what process and material this would be?
Eckhard

A garage full of old bikes and no time. Spend too much time on the Internet!!!
User avatar
Eckhard
Supporter
 
Posts: 1091
Joined: Tue Feb 05, 2008 2:46 am
Location: Chateauguay, Quebec, Canada

Re: Replica 3D Printed Surge Tank Dampers

Postby TurboRestorer » Mon Mar 19, 2018 7:06 pm

Eckhard wrote:Good work. I am interested in 3D printing and am curious as to what process and material this would be?


Its a Prusa i3 Pro B, highly modified printer using PCTPU material, I also have another harder flexible material called PCTPE which is too hard for this application.
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: Replica 3D Printed Surge Tank Dampers

Postby Eckhard » Tue Mar 20, 2018 1:26 am

Thanks for the info.
Eckhard

A garage full of old bikes and no time. Spend too much time on the Internet!!!
User avatar
Eckhard
Supporter
 
Posts: 1091
Joined: Tue Feb 05, 2008 2:46 am
Location: Chateauguay, Quebec, Canada

Re: Replica 3D Printed Surge Tank Dampers

Postby longfiredragon » Tue Mar 20, 2018 11:22 am

Turborestorer, forgive my ignorance but are these the grommets for the plenum side covers? I have never seen these before, probably because if they are for the plenum covers my bike never had them :rofl: Charlie and I just used some pieces of rubber hose. Not sure if Charlie has been able to get the OEM ones but I still have the hose pieces.

Thank you for making these, and offering them at such a good price. Will have to see if others here in the states want some so maybe we could combine, so we don't get killed on the shipping.

Nice work :thumbup
longfiredragon
Supporter
 
Posts: 1776
Joined: Thu Mar 27, 2008 2:13 pm
Location: cocoa florida USA

Re: Replica 3D Printed Surge Tank Dampers

Postby Charlie @ Evergreen » Tue Mar 20, 2018 12:16 pm

Wow that really great work!! Ya LFD & I used Grommet rubber that fit ok. At least thats what I have on there now. Hope we can get a load shipped over here..maybe if someone is sending a turbo they could load em up and I can mail to everyone?? Id take a set for sure! :thumbup
84' ZX750 Turbo 85'ZX750 Turbo
User avatar
Charlie @ Evergreen
Intercooler
 
Posts: 6407
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: Replica 3D Printed Surge Tank Dampers

Postby riturbo » Tue Mar 20, 2018 1:12 pm

Id be in for a set
riturbo
Supporter
 
Posts: 1919
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: Replica 3D Printed Surge Tank Dampers

Postby TurboRestorer » Tue Mar 20, 2018 6:34 pm

Everyone who wants a set (of 8) please use PP £10 to adrianhull80@googlemail.com & i'll send out ASAP. If you are near others in the US please state that you want to combine qty for shipping purposes & I will seperate & label within the package to who gets what qty.

Postage from UK to USA is usually around £1.20 GBP.

I am also working the LCD tank panel seal at the moment using the same material as the grommets.
ZX750-E1, KLR650-A3, ZRX1100-C3, SV650-K1, Moto Morini 3 1/2 Strada
User avatar
TurboRestorer
Member
 
Posts: 61
Joined: Wed Apr 23, 2014 6:30 pm
Location: Southern UK

Re: Replica 3D Printed Surge Tank Dampers

Postby VinoBassi » Wed Mar 21, 2018 7:12 am

Thanks Adrian for doing this obsolete parts,will PM you for a set,Cheers :thumbup :beer
Little Guys Do Have Big Dreams Too!
User avatar
VinoBassi
Supporter
 
Posts: 1801
Joined: Sun Mar 16, 2014 12:18 pm
Location: Sydney Australia

Re: Replica 3D Printed Surge Tank Dampers

Postby Charlie @ Evergreen » Wed Mar 21, 2018 12:00 pm

Paypal sent Adrian :thumbup Thank you! If others want there rubbers sent to me please do and can distribute for you here in the states.
84' ZX750 Turbo 85'ZX750 Turbo
User avatar
Charlie @ Evergreen
Intercooler
 
Posts: 6407
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: Replica 3D Printed Surge Tank Dampers

Postby riturbo » Wed Mar 21, 2018 12:46 pm

Paypal sent You can send them to charlie he can throw them in with my injectors .

Thanks
riturbo
Supporter
 
Posts: 1919
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: Replica 3D Printed Surge Tank Dampers

Postby longfiredragon » Wed Mar 21, 2018 5:58 pm

paypal sent Adrian, thanks

Thanks Charlie
longfiredragon
Supporter
 
Posts: 1776
Joined: Thu Mar 27, 2008 2:13 pm
Location: cocoa florida USA

Re: Replica 3D Printed Surge Tank Dampers

Postby Charlie @ Evergreen » Wed Mar 21, 2018 6:57 pm

Welcome bro..good to go anyone else getting them to US let Adrian know and can ship them from here to anywhere in US. :thumbup
84' ZX750 Turbo 85'ZX750 Turbo
User avatar
Charlie @ Evergreen
Intercooler
 
Posts: 6407
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: Replica 3D Printed Surge Tank Dampers

Postby Mang » Thu Mar 22, 2018 10:50 am

Money sent by PayPal

Thanks Adrian
Mang
User avatar
Mang
Supporter
 
Posts: 2685
Joined: Wed Aug 04, 2010 5:10 pm
Location: Stroud Glos UK

Next

Return to New Parts Resource

Who is online

Users browsing this forum: No registered users and 1 guest