K & N Pod Filters + Dirt & H20 Dry-charger Wraps

Please use this forum to list NEW parts, with their price, supplier and location. NO DISCUSSION PLEASE!

K & N Pod Filters + Dirt & H20 Dry-charger Wraps

Postby Dirck » Fri May 12, 2017 10:25 am


The OE intake is very restrictive and unfortunately draws oil vapor from the crankcase vent.
Prevent H2O turbo-induction by sourcing K&N's Dry-charger Filter Wrap part number to match filter.
Either oval 2452 linked below doubles R-1080 filtration surface-area and will fit beneath the lower cowling
Links below are US. Here's > Worldwide K & N Dealer Locator <.

Scroll down linked page for Dry-charger selection. Maybe easiest to use provided Pre-charger PN dimension to locate match in Dry-charger chart.
> K & N details < on their Pre-charger (dust/dirt) & Dry-Charger (+ hydrophobic) wraps extend filter life.

> K&N RC-2452 <
> RU-2452 (no chrome cap) <
> Pre-charger Filter Wrap (*Non-hydrophibic*) fits both 2452 Filters <

ImageImageImage

> K&N R-1080 <
> Pre-charger Filter Wrap (*Non-hydrophibic*) for R-1080 <

ImageImage

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
> Outerwears Pre-filters < cost about $5 less than K&N.

Image

Outerwears Dust/Dirt/H2O Resistant Pre-filters are designed to enhance the efficiency of any performance or exposed air filter. The Pre-filter is constructed with a proprietary polyester mesh with uniform micron openings, treated with an optional hydrophobic water-repellent process. The mesh is UV resistant, filters debris down to .005”, is shatter proof in freezing temperatures, and resistant to heat up to 450 degrees. The material is puncture resistant and has elasticity characteristics allowing the threads to return to the original position in the event the threads have been impacted or shifted. The manufacturing process incorporates a welded seam for strength, or reinforced industrial grade thread to fill needle holes and to reduce potential failure points in the material. The top seam utilizes specialized thread and cording (ON LARGER PIECES W/TOPS) to reinforce durability of the top. Six stock colors are available in either regular or the water-repellent variety. Special colors are available with appropriate volume. Pre-filters are designed to deflect the damaging debris, which clogs air filters, compromising peak air-flow and horsepower. The Pre-filter also extends the time between servicing intervals reducing costs and increasing convenience for the consumer.

Outerwears performance test data below should be in the neighborhood of K & N's Pre-charger and Dry-charger.

ImageImage
User avatar
Dirck
Supporter
 
Posts: 5279
Joined: Sun Jan 12, 2003 5:00 pm

Return to New Parts Resource

Who is online

Users browsing this forum: No registered users and 2 guests

cron