New 750T silencers possibility for manufacture

Advertise bikes, parts or anything else here (as long as it's 750turbo related).
benblaney1
Member
Posts: 14
Joined: Sat Apr 26, 2008 8:25 am
Location: Colorado Springs, CO

Re: New 750T silencers possibility for manufacture

Post by benblaney1 »

Malcolm and Ray - thanks for the efforts on this. I'm very excited, and I would think lots of others are too. Much appreciated.
User avatar
ray750t
Member
Posts: 240
Joined: Fri Mar 20, 2009 12:14 am
Location: Aberdeen

Re: New 750T silencers possibility for manufacture

Post by ray750t »

Maybe if there is enough genuine interest and looks worthwhile I will send Malc a good H pipe - not to cut up !
I have no idea on how much it would cost but I had a look at one yesterday and they are a lot of work and have to be dimensionally spot on with 5 points of contact being turbo, 2 fitting bolts and 2 silencers - with some tricky bends - at least it may not need to be finished / dressed to the same std as a silencer
benblaney1
Member
Posts: 14
Joined: Sat Apr 26, 2008 8:25 am
Location: Colorado Springs, CO

Re: New 750T silencers possibility for manufacture

Post by benblaney1 »

ray750t wrote:Maybe if there is enough genuine interest and looks worthwhile I will send Malc a good H pipe - not to cut up !
I have no idea on how much it would cost but I had a look at one yesterday and they are a lot of work and have to be dimensionally spot on with 5 points of contact being turbo, 2 fitting bolts and 2 silencers - with some tricky bends - at least it may not need to be finished / dressed to the same std as a silencer
Absolutely, yes. I think there would be absolutely loads of interest in those.

Fingers crossed.
User avatar
Betterthanfabio
Supporter
Posts: 5519
Joined: Mon Mar 07, 2011 10:31 am
Location: Hobart Tasmania Australia

Re: New 750T silencers possibility for manufacture

Post by Betterthanfabio »

I would be interested in an H pipe maybe 2.
You should try to know everything about something & something about everything.
User avatar
ray750t
Member
Posts: 240
Joined: Fri Mar 20, 2009 12:14 am
Location: Aberdeen

Re: New 750T silencers possibility for manufacture

Post by ray750t »

Ok anyone looking fo H pipes Email Malcolm, I will send him some pics tomorrow, he will need one to copy from which I can give him , what’s the big problem with H pipes ? Corrosion ?
User avatar
dazbo
Supporter
Posts: 1708
Joined: Wed Apr 10, 2002 11:48 pm
Location: merseyside uk

Re: New 750T silencers possibility for manufacture

Post by dazbo »

that and the fact they are too small in diameter so a bit restrictive.
especially when switching to race mode.
lots of folks replaced them with any number of less restrictive options from open dumps to replacement single silencer pipes like harris and predator etc.
many obviously then chucked perfectly good h pipes away ,kawasaki stopped making them and so there is a healthy resto market.
Olcockie
Supporter
Posts: 10
Joined: Thu Aug 20, 2020 7:38 am
Location: Western Australia

Re: New 750T silencers possibility for manufacture

Post by Olcockie »

and the boys in blue :cop took a dim view of me draining the beer can prior to tying it around the pipes when they whinged about the noise! :rofl:
ZX750 E1
GPz900r A7
Lots more on wish list!
User avatar
ray750t
Member
Posts: 240
Joined: Fri Mar 20, 2009 12:14 am
Location: Aberdeen

Re: New 750T silencers possibility for manufacture

Post by ray750t »

So does anyone know why USA exhausts has bigger holes and as I understand they couldn’t enable race mode ? I only read that somewhere recently but I did notice the USA Ecu is a different part number on the ecu
riturbo
Supporter
Posts: 2128
Joined: Wed Jul 07, 2010 2:27 pm
Location: Rhode Island USA

Re: New 750T silencers possibility for manufacture

Post by riturbo »

Maybe something to do with noise restrictions ? No problems enabling race mode . :popcorn


No idea really why are silencers are different . :popcorn
Malcolm Cox
Member
Posts: 24
Joined: Tue Nov 24, 2020 2:51 pm

Re: New 750T silencers possibility for manufacture

Post by Malcolm Cox »

Thanks to evertone who have contacted me and replied to my emails........
There are a few people who I am still waiting to hear from......

Coln Vicorey
Rich-rslv67
Dazbo

Please can the above please reply to my emails........thank you
regards
Malcolm
User avatar
Betterthanfabio
Supporter
Posts: 5519
Joined: Mon Mar 07, 2011 10:31 am
Location: Hobart Tasmania Australia

Re: New 750T silencers possibility for manufacture

Post by Betterthanfabio »

I'd still love a larger diam h pipe, still have that stock look but less restrictive.Yeah I know its not gonna happen.
You should try to know everything about something & something about everything.
Malcolm Cox
Member
Posts: 24
Joined: Tue Nov 24, 2020 2:51 pm

Re: New 750T silencers possibility for manufacture

Post by Malcolm Cox »

HAPPY NEW YEAR to all members.!!!

I have now sent out to interested members the first updates on the silencer production......

Update 1 was the introductory letter......

Update 2 was sent out 4th January 2021....

Update 3 was sent out 9th January 2021....

IF you do not have them, please contact me on coxeng@gmx.com or PM me on the forum.....
Also, check your spam..I may be lurking there too..!!!! haha

Update 4 Will be next weekend.

kind regards
Malcolm
User avatar
Will Barber
Member
Posts: 33
Joined: Sat Nov 30, 2019 10:39 am
Location: Whitchurch, Shropshire

Re: New 750T silencers possibility for manufacture

Post by Will Barber »

Keep going Malc, your efforts are enormously appreciated and hopefully a good investment for you. :clap
ZX750E1, Z1000R, GPZ1000RX, ZRX1100, CB1100R, VF1000R, VF500
Malcolm Cox
Member
Posts: 24
Joined: Tue Nov 24, 2020 2:51 pm

Re: New 750T silencers possibility for manufacture

Post by Malcolm Cox »

Thank you Will, at least the members signed up for updates will understand all the work involved in the design and
manufacture of the silencers and "h" pipe.........

We will continue until all is manufactured and supplied to those who want them..!!!

Regards
Malcolm
Malcolm Cox
Member
Posts: 24
Joined: Tue Nov 24, 2020 2:51 pm

Re: New 750T silencers possibility for manufacture

Post by Malcolm Cox »

UPDATE 5 about the Black Chrome Silencers Manufacture and "h" pipes, was sent out Saturday 23/1/2021.

If you did not get this, please let me know, or if you want to be added to the list to be informed you can
PM me or email, coxeng@gmx.com

kind regards
Malcolm
Post Reply