what is the different ??
11043-1667 non turbo
11943-1668 turbo
cowling bracket
- Würstchens-Turbo 810
- Intercooler
- Posts: 1454
- Joined: Fri Feb 15, 2008 7:57 pm
- Location: Bremen / Germany
- Contact:
cowling bracket
Greatest moments are Torque-moments !!!
http://www.xn--wrstchens-turbokawa810-slc.de
http://www.turbomotorcycles.org/TMIOA/P ... tchen.html
http://www.xn--wrstchens-turbokawa810-slc.de
http://www.turbomotorcycles.org/TMIOA/P ... tchen.html
- JezZedexE1
- Supporter
- Posts: 4706
- Joined: Mon May 17, 2010 7:40 am
- Location: Royal Forest Of Dean, England
Re: cowling bracket
Looking at them, it would possibly be the tab for routing a harness on the LHS.
NA 1667 - Turbo 1668 .


NA 1667 - Turbo 1668 .
JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
2 x UK ZX-750E1
1 x US ZX-750E2
- Würstchens-Turbo 810
- Intercooler
- Posts: 1454
- Joined: Fri Feb 15, 2008 7:57 pm
- Location: Bremen / Germany
- Contact:
Re: cowling bracket
Ok
Thanks
dimension are all the same?
Thanks
dimension are all the same?
Greatest moments are Torque-moments !!!
http://www.xn--wrstchens-turbokawa810-slc.de
http://www.turbomotorcycles.org/TMIOA/P ... tchen.html
http://www.xn--wrstchens-turbokawa810-slc.de
http://www.turbomotorcycles.org/TMIOA/P ... tchen.html
- JezZedexE1
- Supporter
- Posts: 4706
- Joined: Mon May 17, 2010 7:40 am
- Location: Royal Forest Of Dean, England
Re: cowling bracket
I cannot say for sure.dimension are all the same?

I do not know but I am sure the upper fairing/cowling outer on the later A3-5 bikes is the same size as the Turbo but the numbers differ due to the colour schemes.

The other possible difference is the mounting point spacing/position of the frame. I will have a look later to see whether I have one of each knocking about somewhere.

JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
2 x UK ZX-750E1
1 x US ZX-750E2
- Betterthanfabio
- Supporter
- Posts: 5757
- Joined: Mon Mar 07, 2011 10:31 am
- Location: Hobart Tasmania Australia
Re: cowling bracket
Pretty sure the earlier NA is different though. Theres a chopped up bracket on the spares bike where someone fitted the earlier fairing & it didnt fit properly. I now the proper fairing but still need the bracket.
You should try to know everything about something & something about everything.
- JezZedexE1
- Supporter
- Posts: 4706
- Joined: Mon May 17, 2010 7:40 am
- Location: Royal Forest Of Dean, England
Re: cowling bracket
The A1 is the one to avoid. Other than the frame mounting points probably being different due to the frame being different, it does not have the mid-panel mounting slots. The edge is sort of flared along the lower edges as well for easy identifying.
For the record, the ZX1100A fairing is a bit bigger and does not fit.

For the record, the ZX1100A fairing is a bit bigger and does not fit.


JezZedexE1
2 x UK ZX-750E1
1 x US ZX-750E2
2 x UK ZX-750E1
1 x US ZX-750E2
- DEATH_INC.
- Member
- Posts: 879
- Joined: Fri Apr 28, 2006 8:00 pm
- Location: Auckland, New Zealand, at the arse end of the planet
Re: cowling bracket
The later N/A frame sits the fairing higher. I can't remember how much, but it's quite a bit, 1/2 to 1". Otherwise they're the same. It's only the triangle shaped bracket with the 2 bolts in it to the frame that's different from memory, I think the 'outriggers' still line up once you cut off and change the triangle bracket.(I could be wrong about that bit, it was a long time ago).
Rip Loosebruce and Daryl 

- Würstchens-Turbo 810
- Intercooler
- Posts: 1454
- Joined: Fri Feb 15, 2008 7:57 pm
- Location: Bremen / Germany
- Contact:
Re: cowling bracket

thx all
Greatest moments are Torque-moments !!!
http://www.xn--wrstchens-turbokawa810-slc.de
http://www.turbomotorcycles.org/TMIOA/P ... tchen.html
http://www.xn--wrstchens-turbokawa810-slc.de
http://www.turbomotorcycles.org/TMIOA/P ... tchen.html
- Eckhard
- Supporter
- Posts: 1133
- Joined: Tue Feb 05, 2008 2:46 am
- Location: Chateauguay, Quebec, Canada
Re: cowling bracket
Purely a left field idea but you computer types could use a free software called Meshroom to make a 3d model of each frame and then overlay the models in CAD to see the differences. All that is needed is a cell phone with a camera and a PC with an NVIDIA graphics card. Enjoy .
Eckhard
A garage full of old bikes and no time. Spend too much time on the Internet!!!
A garage full of old bikes and no time. Spend too much time on the Internet!!!