Duty cycle

How to fit a powercommander to tune your fuelling
Post Reply
User avatar
Würstchens-Turbo 810
Intercooler
Posts: 1499
Joined: Fri Feb 15, 2008 7:57 pm
Location: Bremen / Germany
Contact:

Duty cycle

Post by Würstchens-Turbo 810 »

Hi how important is the "Duty Cycle" in the PCIIIusb Software for us ?

I dont understand this
User avatar
mankam
Supporter
Posts: 219
Joined: Fri Dec 06, 2013 3:35 pm
Location: Greece

Re: Duty cycle

Post by mankam »

it's never too late for an answer :lol:

“Duty Cycle” displays the percentage of time the injector is open during one cam revolution (fuel cycle). In advance mod, it's the percentage of time for each cylinder's duty cycle. Without the Power Commander, the Duty Cycle is controlled by the ECU


Here is a video that explains:

User avatar
Würstchens-Turbo 810
Intercooler
Posts: 1499
Joined: Fri Feb 15, 2008 7:57 pm
Location: Bremen / Germany
Contact:

Re: Duty cycle

Post by Würstchens-Turbo 810 »

Hi Thanks .
My (the) Power Commander3usb not shows a Duty Cycle Area.
But i use the innovate SSi-4 Box for Data recording and this Box can show Duty Cycle but i dont know how ,
i dont know which wire , out from Injektor ) is positiv and which is ground .
Pur Injektors open by ground or open by + . ?
User avatar
DEATH_INC.
Member
Posts: 888
Joined: Fri Apr 28, 2006 8:00 pm
Location: Auckland, New Zealand, at the arse end of the planet

Re: Duty cycle

Post by DEATH_INC. »

Injectors are normally controlled by the - or negative (ground) wire. The + positive one should power up when the key is turned on.
- wire is yellow on the stock bike, and + is red/white.
Rip Loosebruce and Daryl :(
User avatar
Würstchens-Turbo 810
Intercooler
Posts: 1499
Joined: Fri Feb 15, 2008 7:57 pm
Location: Bremen / Germany
Contact:

Re: Duty cycle

Post by Würstchens-Turbo 810 »

Thank you very much :beer
User avatar
Würstchens-Turbo 810
Intercooler
Posts: 1499
Joined: Fri Feb 15, 2008 7:57 pm
Location: Bremen / Germany
Contact:

Re: Duty cycle

Post by Würstchens-Turbo 810 »

hi again after a few years :D
Please how to show Duty cycle in my PC3 usb
i see only

throttle
upm
Fuel change
zyklus ( what is it ?)
User avatar
Würstchens-Turbo 810
Intercooler
Posts: 1499
Joined: Fri Feb 15, 2008 7:57 pm
Location: Bremen / Germany
Contact:

Re: Duty cycle

Post by Würstchens-Turbo 810 »

Würstchens-Turbo 810 wrote: Sun Oct 22, 2023 4:58 pm hi again after a few years :D
Please how to show Duty cycle in my PC3 usb
i see only

throttle
upm
Fuel change
zyklus ( what is it ?) Edit >> ITS Duty Cycle
User avatar
Charlie @ Evergreen
Intercooler
Posts: 7582
Joined: Sun Nov 17, 2013 12:20 am
Location: Ocala, Florida USA

Re: Duty cycle

Post by Charlie @ Evergreen »

Hopefully someone with experience in PC will answer soon Horst :beer
Post Reply