Front Fender with ZRX1100 Fork

[Würstchens-Turbo 810]

Hi
i use a ZRX1100 front-fork ( Tyre 120/70ZR17 ( with a ZRX1100 Fender )
Question:
It is possible to use the stock 750Turbo Fender ,or its to small ?

If not , which fender fits and look anyway like the stock turbo fender ?

OR
use someone the stock (110 /18") fender with a 120/70Zr17 Tyre ????????

THX
Horst

[longfiredragon]

Horst, I have never heard of anyone wanting to do this. Most that swap front ends do what you already have which is just go with a all together different fender. I know I am going with a replica ZR7/ZR9 fender on mine.

Anyway, when you say smaller you are referring to not as wide? because of the not as wide stock turbo tire? Because the stock turbo fender I think is plenty wide enough from around the middle all the way to the back. It seems like if it is too small for the 120/70/17 it would be in the front of the fender.

Point is, maybe you could make some new brackets and kick or offset the fender up a little in the front to clear the tire. Then it may work. I know some have drilled the turbo fender holes out and offset the fender to make room to clear an intercooler.

[johnb]

Reused my original front fender cause Im to tight to buy the correct one.
Front ends a ZZR1100 tho,
Seems to fit ok.

IMG20210417180445.jpg (47.95 KiB) Viewed 8596 times

[Würstchens-Turbo 810]

Thanks all