750turbo.com

I read somewhere, that the valve seals can be changed without disassembling the head, pressurising the cylinder with both valves closed... anyone has done this or knows how this is done?

Where can I get valve seals?

cheers

Hi

Just done a turbo rebuiding, with the gpopshop hitachi kit, the service and rebalance was done in a local turbo repair shop, and just noticed that is still smoking.

And as before it smokes only when I cut down the throttle :? and I think, only when the engine is warm...

I'm gessing that the ...

Hi


Looks like that I'm gonna have to spent lots of €€€ :( but without that the bike won't be as it should.... I came all the way from the U.K. to Portugal on it, and at hi revs it charges ok ,but when riding in citycenter the stator won't charge enough...

I gess i'll start looking for the stator ...

Hi

Just measured the stator and it has 93mm diameter... and the rotor 95mm
is it a straight swap for the the turbo rotor unit? as I bought my turbo used is it possible that previous owner may have fitted the NA stator/rotor unit? I also have a bosch pump fuel fitted, and if I'm in low revs and ...

I'll measure the stator and rotor and post the results...

But how can the same bike have different parts, in the same production series???

Hi

I got mine here in Portugal, it's from a nissan, It's the exact same shape, just not as transparent as the oem one...

It's witten that for diesel, but It has been working fine :)

The manufacturer is HIFI part# SN20004 and nissan part# 16400-25900


http://www.jurafiltration.fr/?langue=en ...

Hi,

Does anyone know what is the generator rotor/flywheel inner diameter?

I think that the unit that is on my turbo isn't the proper one... It works but I think it's a bit smaller... and If the revs are low it doesn't charge as it should...

When fitted another does it need to rebalance the ...

Hi
I was watching these pics and I have notice that it does not have the cpu third support, and on mine is missing as well... Does anyone knows or migght have a photo of any?

cheers,

Miguel

Hi guys

Just arrived to portugal on my turbo, I,ve done 1600 miles in five days with no probs...



1st night Le Mans, 2nd in La Rochelle then Biarritz and the last night was in europes pikes in north Spain, Fuel and some engine oil was all that was needed.

just loved it, was an amazing journey ...

so what is the best gasket option for an 810 kit with a t25? where can i get it from?

could i run it on 13psi(with intecoooler)? what mods more do i need? or is it 2 much...

Lorcan, what did you mean by "a copper gasket if you get the liners o-ringed"



Mom, why is the sky blue?

Hi guys

I have a smokin bike but only after cutting down the throttle and give it again, makes a cloud of smoke and then cleans !!!...

another is if i block the breather that goes to the air filter intake, on idle it starts smonkig crazy... :shock:

Any Ideas what might be?

I suspect in the ...

Hi

I'm not sure if this is the right place to post this thread,but ...

just found this nice head light uk specs on ebay... here's the link:

http://cgi.ebay.co.uk/Streetfighter-headlight-fairing-Honda-Suzuki-Yamaha_W0QQitemZ300106907578QQihZ020QQcategoryZ25628QQssPageNameZWDVWQQrdZ1QQcmdZViewItem ...

Hi

Does anyone knows the width of the original rear shock top end and the the bottom end inner width?

many thanx

Suika

Just got a visit from Mik... and after some trials and adjusting the trhottle sensor, fresh petrol, the bike is running and it seems very sound... all thanks to Mik

Once again thanks to you alland Mik for your help !!!

Now I can start to do the service on the bike and get ready 4 a nice ride on ...

just returning from my sleeping beauty...

After disconecting all the possible fuel intake cleaned the plugs and tryed to start the engine spraying some fast start. and it still revs just for 1 /2 secs and shuts... when i tryed to spray more to make it rev longer it makes major blowback.

the ...