pc3 usb wiring

[turbotony]

had a problem with the wiring from the power comander output wires, if you connect them all together a high revs complete shutdown that was the problem i was getting, so dont connect all together do them seperate to the injectors

[Lorcan]

That's how we suggested you do them anyway. The PC3 is built for sequential injection, so keep those output wires separate

[turbotony]

works great i have done the same with the input wires aswell thanks for all the info from all you lads , does anybodys bike wheely with 17 front& 38 back sprocks 1st 2nd 3rd gear standerd pistons

[Würstchens-Turbo 810]

That's how we suggested you do them anyway. The PC3 is built for sequential injection, so keep those output wires separate

At my PCIIIusb ZX12R i put the output wires togehter to yellow original and i put also the input wires togehter to yellow original ..ia this my mistake why my PCIII not correct works , you know my problem